Hello @namklabs @Birish03,
I checked my temperature bit on my attic (a very hot day today)
My room thermometer indicated 30 degrees C and my temperature sensor 31 degrees C. (I used the USB power bit and connected the number bit and the cloud bit on the output of the temperature sensor.
My android tablet showed 33 degrees C. (Should I trust this ?)
When I connected the cloudbit directly on the output of the temperature sensor, the sensor raised 3 degrees C. No surprise, the cloudbit radiates some heat which is detected by the sensor...
So as @Birish03 stated, the best way is connecting the sensor via some wire bits to avoid the heating influence from other bits in the chain.